CAT3626AEVB: 6-Channel Charge Pump Evaluation Board

The CAT3626 is a 6-channel charge pump that has been designed to drive up to 6 LEDs connected in parallel. The device can drive three groups of two LEDs. Each group can be configured with independent LED current of up to 32mA max per channel through the I2C serial interface. The CAT3626 is operating in either 1x mode (LDO), or 1.5x mode and provides tightly matched regulated current through the six LED outputs. Each LED channel can be also turned off/on independently through the I2C bus.
製品 状態 Compliance 簡単な説明 使用パーツ アクション
CAT3626AEVB Active
6-Channel Charge Pump Evaluation Board CAT3626HV4-GT2
Avnet (2016-06-23) : 1
Digikey (2016-06-23) : 1
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: BOM CAT3626AEVB Bill of Materials CAT3626AEVB_BOM.PDF - 140.0 KB  0 
Eval Board: Gerber CAT3626AEVB Gerber Layout Files (Zip Format) CAT3626AEVB_GERBER.ZIP - 67.0 KB  0 
Eval Board: Schematic CAT3626AEVB Schematic CAT3626AEVB_SCHEMATIC.PDF - 240.0 KB  0 
Eval Board: Test Procedure CAT3626AEVB Test Procedure CAT3626AEVB_TEST_PROCEDURE.PDF - 124.0 KB  0 
Eval Board: Manual CAT3626 6-Channel LED Driver Evaluation Board User's Manual EVBUM2018/D - 165.0 KB  3 
Software CAT3626AEVB Software CAT3626AEVB_SOFTWARE.ZIP - 17.0 KB  0