feedback
このページの評価をお願いします

サポート情報をお探しですか?


NCP380HMU10AGEVB: High-Side Power Distribution Switch Evaluation Board

評価/開発ツール説明

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 70 mΩ (DFN package), P channel MOSFET in a single package.

The device limits the output current to a desired level by switching into a regulation current-mode when the output load exceeds the current-limit threshold or a short is present. The current limit threshold is either user adjustable between 100mA and 2.1A via an external resistor or internally fixed.The power switch rise and fall times are controlled to minimize current ringing during switching.

An internal reverse-voltage detection comparator disables the power-switch if the output voltage is higher than the input voltage to protect devices on the input side of the switch. The /FLAG logic output asserts low during over current, reverse-voltage or over temperature conditions. The switch is controlled by a logic enable input active high or low.

評価/開発ツール情報
製品 状態 Compliance 簡単な説明 使用パーツ アクション
NCP380HMU10AGEVB Active
Pb-free
High-Side Power Distribution Switch Evaluation Board NCP380HMU10AATBG
Avnet (2016-09-22) : 2
Mouser (2016-09-22) : 2
Digikey (2016-09-22) : 2
技術文書
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: BOM NCP380HMU10AGEVB Bill of Materials ROHS Compliant NCP380HMU10AGEVB_BOM_ROHS.PDF - 76 KB  0 
Eval Board: Gerber NCP380HMU10AGEVB Gerber Layout Files (Zip Format) NCP380HMU10AGEVB_GERBER.ZIP - 104.0 KB  0 
Eval Board: Schematic NCP380HMU10AGEVB Schematic NCP380HMU10AGEVB_SCHEMATIC.PDF - 32.0 KB  0 
Eval Board: Test Procedure NCP380HMU10AGEVB Test Procedure NCP380HMU10AGEVB_TEST_PROCEDURE.PDF - 75 KB  0 
過去に閲覧した製品
一覧をクリアする