feedback
このページの評価をお願いします

サポート情報をお探しですか?


AMIS-41683: CAN Transceiver, Fault Tolerant , 3.3 V

Overview
Specifications
Applications
Datasheet: Fault Tolerant CAN Transceivers (AMIS-41682 and AMIS-41683)
Rev. 9 (213kB)
»材料組成を表示
»製品変更通知 (4)
Product Overview
製品説明
The new AMIS-41682 and AMIS-41683 are interfaces between the protocol controller and the physical wires of the bus lines in a control area network (CAN). AMIS-41683 is identical to the AMIS-41682 but has a true 3.3V digital interface to the CAN controller. The device provides differential transmit capability but will switch in error conditions to a single-wire transmitter and or receiver. Initially it will be used for low speed applications, up to 125kBaud, in passenger cars.
Both AMIS-41682 and AMIS-41683 are implemented in I2T100 technology enabling both high-voltage analog circuitry and digital functionality to co-exist on the same chip.
These products consolidate the expertise of ON Semiconductor for in-car multiples transceivers and support together with 0REMX-002-XTP (VAN), AMIS-30660 and AMIS-30663 (CAN high speed) and AMIS-30600 (LIN) another widely used physical layer.
特長
 
  • Fully compatible with ISO11898-3 standard
  • Very low electromagnetic emission (EME)
  • Fully integrated receiver filters
  • Permanent monitoring of transmit data input
  • High electromagnetic susceptibility (EMS) in normal- and low-power modes
  • True 3.3V digital I/O interface to CAN controller
  • In the event of bus failure, automatic switching to single-wire mode
  • The device will automatically reset to differential mode if the bus failure
  • During failure modes there is full wake-up capability
  • Un-powered nodes do not disturb bus lines
  • Bus errors and thermal shutdown activation is flagged on ERRB pin
  • Short circuit proof to battery and ground
  • Thermal protection
  • The bus lines are protected against transients in an automotive environment
  • Support for low power modes
  • Low current sleep and standby mode
  • Power-on flag on the output
  • Two-edge sensitive wake-up input signal via pin WAKEB
アプリケーション   最終製品
  • In-Vehicle Networking
 
  • Automobiles
技術資料 & デザイン・リソース
チュートリアル (1) データシート (1)
アプリケーション ノート (9) パッケージ図 (1)
供給状況 & サンプル
製品
状態
Compliance
内容
外形
MSL*
梱包形態
予算 価格/Unit
タイプ
Case Outline
タイプ
数量
AMIS41683CANN1G Last Shipments
AEC Qualified
PPAP Capable
Pb-free
Halide free
CAN Transceiver, Fault Tolerant , 3.3 V SOIC-14 751AP 2 Tray JEDEC 55  
AMIS41683CANN1RG Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
CAN Transceiver, Fault Tolerant , 3.3 V SOIC-14 751AP 2 Tape and Reel 3000 Contact Sales Office
面実装デバイスためのモイスチャー・レベル(260°Cリフローでの鉛フリー測定、235°Cリフローでの鉛フリー以外測定)
マーケットリードタイム(週) : Contact Factory
PandS   (2016-08-25 00:00) : <100
マーケットリードタイム(週) : Contact Factory
Arrow   (2016-08-26 16:23) : 98
Digikey   (2016-08-25 00:00) : >1K
Mouser   (2016-08-25 00:00) : >1K
Datasheet: Fault Tolerant CAN Transceivers (AMIS-41682 and AMIS-41683)
Rev. 9 (213kB)
»材料組成を表示
»製品変更通知 (4)
Product Overview

Product Compliance Status Description Data Transmission Standard Data Rate Number of Drivers Number of Receivers VCC Min (V) VCC Max (V) tPLH Max (µs) IO Max (µA) IIH Max (mA) Package Type
AEC Qualified
PPAP Capable
Pb-free
Halide free
 Active     CAN Transceiver, Fault Tolerant , 3.3 V 
CAN
 
1
1
4.75
5.25
8
45000
6.3
SOIC-14
過去に閲覧した製品
一覧をクリアする

Associated Products
  Do you also need ESD Protection Diodes?