NCP1080: Integrated 13 W PoE-PD & DC-DC Converter Controller (IEEE 802.3af)

Overview
Specifications
Packages
Applications
Datasheet: Power over Ethernet Powered Device (PoE-PD)
Rev. 4 (207.0kB)
»材料組成を表示
»No Product Change Notifications exist
製品の説明
The NCP1080 is a member of ON Semiconductor's Power over Ethernet Powered Device (PoE-PD) product family and represents a robust, flexible and highly integrated solution targeting demanding Ethernet applications. It combines in a single unit an enhanced PoE-PD interface fully compliant with the IEEE 802.3af specification and a flexible and configurable DC-DC converter controller.
The NCP1080's exceptional capabilities offer new opportunities for the design of products powered directly over Ethernet lines, eliminating the need for local power adapters or power supplies and drastically reducing the overall installation and maintenance cost.
ON Semiconductor's unique manufacturing process and design enhancements allow the NCP1080 to deliver up to 13 W of regulated power to support PoE applications according to the IEEE 802.3af standard. This device leverages the significant cost advantages of PoE-enabled systems to a broad spectrum of products in markets such as VoIP phones, wireless LANs, security cameras, point of sales terminals, RFID readers, industrial Ethernet, etc.
The integrated current mode DC-DC controller facilitates isolated and non-isolated flyback, forward and buck converter topologies. It has all the features necessary for a flexible, robust and highly efficient design including programmable switching frequency, duty cycle up to 80 percent, slope compensation, and soft start up.
The NCP1080 is fabricated in a robust high voltage process and integrates a rugged vertical N-channel DMOS with a low loss current sense technique suitable for the most demanding environments and capable of withstanding harsh environments such as hot swap and cable ESD events.
特長   利点
     
  • Delivers up to 13 W
 
  • Support for traditional PoE apps
  • Full operation to TJ=150C
 
  • Wide operating temperature range
  • Robust 3.0 kV cable ESD protection
 
  • Extended operation in harsh environments
  • Exposed TSSOP-20 EP package
 
  • Thermally enhanced package for higher output current
アプリケーション   最終製品
  • Power over Ethernet Powered Device (PoE-PD) interface and Integrated DC-DC converter controller
 
  • VoIP phones
  • WLAN access points
  • Box security cameras
  • Industrial Ethernet HMIs and UPS backed PLCs and IOMs
  • Point of Sales terminals
  • RFID readers
技術情報
アプリケーション ノート (1) パッケージ図 (1)
データシート (1)  
供給状況およびサンプル
製品
ステータス
鉛フリー
内容
パッケージ
MSL*
コンテナ
予算価格/ユニット
タイプ
ピン
ケース形状
タイプ
数量
NCP1080DEG Active Integrated PoE-PD & DC-DC Converter Controller (IEEE 802.3af 13 W) TSSOP-20 EP, 6.5x4.4 20 948AB 2 Rail 74 Contact Sales Office
NCP1080DER2G Active Integrated PoE-PD & DC-DC Converter Controller (IEEE 802.3af 13 W) TSSOP-20 EP, 6.5x4.4 20 948AB 2 Tape and Reel 2500 Contact Sales Office
面実装デバイスためのモイスチャー・レベル(260°Cリフローでの鉛フリー測定、235°Cリフローでの鉛フリー以外測定)
Phases : 1
Topology : Multimode
IO Max (µA) : 570000
Package : TSSOP-20 EP, 6.5x4.4
VCC Max (V) : 57
VCC Max (V) : 57
fSW Typ (kHz) : 250
tres Typ (ns) : 37
Control Mode : Current Mode
Package : TSSOP-20 EP, 6.5x4.4
VCC Min (V) : 0
VCC Min (V) : 0
マーケットリードタイム(週) : Contact Factory
P&S (2010-07-30) : <100
Phases : 1
Topology : Multimode
IO Max (µA) : 570000
Package : TSSOP-20 EP, 6.5x4.4
VCC Max (V) : 57
VCC Max (V) : 57
fSW Typ (kHz) : 250
tres Typ (ns) : 37
Control Mode : Current Mode
Package : TSSOP-20 EP, 6.5x4.4
VCC Min (V) : 0
VCC Min (V) : 0
マーケットリードタイム(週) : Contact Factory
電気的仕様を選択してください

完全な電気的仕様については、を参照してください データシート.

シンボル 境界 単位
Topology typ Multimode
VCC min 0
V
VCC max 57
V
fSW typ 250
kHz
tres typ 37
ns
Phases 1
Mode Current Mode
For complete packaging information, see the datasheet
»材料組成を表示
ケース形状
948AB   
パッケージ
For complete product information, see the datasheet
過去に閲覧した製品
一覧をクリアする

Associated Products
  Do you also need MOSFETs?
Do you also need MOSFET / IGBT Drivers?