feedback
このページの評価をお願いします

サポート情報をお探しですか?


NCV7381: Clamp 30 FlexRay™ Transceiver

Overview
Specifications
Packages
Applications
Datasheet: NCV7381 FlexRay™ Bus Driver
Rev. 3 (166kB)
»材料組成を表示
»製品変更通知 (5)
Product Overview
製品説明
NCV7381 is a single-channel FlexRay transceiver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocol controller and a host on the other side.
NCV7381 mode control functionality is optimized for nodes permanently connected to car battery.
It offers excellent EMC and ESD performance.
特長
 
  • Compliant with FlexRay Electrical Physical Layer Specification
    Rev 3.0.1
  • FlexRay Transmitter and Receiver in Normal-power Modes for
    Communication up to 10 Mbit/s
  • Support of 60 ns Bit Time
  • FlexRay Low-power Mode Receiver for Remote Wakeup Detection
  • Excellent Electromagnetic Susceptibility (EMS) Level over Full
    Frequency Range. Very Low Electromagnetic Emissions (EME)
  • Bus Pins Protected against >10 kV System ESD Pulses
  • Safe Behavior under Missing Supply or No Supply Conditions
  • Interface Pins for a Protocol Controller and a Host
    (TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN)
  • INH Output for Control of External Regulators
  • Local Wakeup Pin WAKE
  • TxEN Time-out
  • BGE Feedback
  • Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up:
    - VBAT Supply Parametrical Range from 5.5 V to 50 V
    - VCC Supply Parametrical Range from 4.75 V to 5.25 V
    - VIO Supply Parametrical Range from 2.3 V to 5.25 V
  • Compatible with 14 V and 28 V Systems
  • Operating Ambient Temperature -40C to +125C (TAMB_Class1)
  • Junction Temperature Monitoring with Two Levels
  • FlexRay Functional Classes
    - Bus Driver Voltage Regulator Control
    - Bus Driver Bus Guardian Interface
    - Bus Driver Logic Level Adaptation
    - Bus Driver Remote Wakeup
  • Automotive Qualification According to AECQ100 (Rev. F)
アプリケーション   最終製品
  • In Vehicle Networking
  • Powertrain
  • X-by-Wire
  • Safety
 
  • Automobiles
技術資料 & デザイン・リソース
ソフトウェア (2) パッケージ図 (1)
アプリケーション ノート (1) 評価ボード文書 (9)
データシート (1)  
評価/開発ツール情報
製品 状態 Compliance 簡単な説明 アクション
NCV73810V2GEVB Active
Pb-free
Flexray Evaluation Board
NCV7381GEVK Active
Pb-free
Clamp 30 FlexRay™ Evaluation Kit
Avnet (2016-08-25) : 2
供給状況 & サンプル
製品
状態
Compliance
内容
外形
MSL*
梱包形態
予算 価格/Unit
タイプ
Case Outline
タイプ
数量
NCV7381DP0G Last Shipments
AEC Qualified
PPAP Capable
Pb-free
Halide free
Clamp 30 FlexRay™ Transceiver SSOP-16 565AE 2 Tube 76  
NCV7381DP0R2G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
Clamp 30 FlexRay™ Transceiver SSOP-16 565AE 2 Tape and Reel 2000 Contact Sales Office
面実装デバイスためのモイスチャー・レベル(260°Cリフローでの鉛フリー測定、235°Cリフローでの鉛フリー以外測定)
マーケットリードタイム(週) : Contact Factory
マーケットリードタイム(週) : Contact Factory
Datasheet: NCV7381 FlexRay™ Bus Driver
Rev. 3 (166kB)
»材料組成を表示
»製品変更通知 (5)
Product Overview

Product Compliance Status Description Data Transmission Standard Data Rate Number of Drivers Number of Receivers VCC Min (V) VCC Max (V) tPLH Max (µs) IO Max (µA) IIH Max (mA) Package Type
AEC Qualified
PPAP Capable
Pb-free
Halide free
 Active     Clamp 30 FlexRay™ Transceiver 
FlexRay
10 Mb/s
1
1
5.5
50
0.06
60000
17
SSOP-16
過去に閲覧した製品
一覧をクリアする

Associated Products
  Do you also need ESD Protection Diodes?

Do you need a device with connectivity to Clamp 15 ECUs? NCV7383