feedback
このページの評価をお願いします

サポート情報をお探しですか?


NCV8881: Switcher with watchdog and reset

Overview
Specifications
Datasheet: 1.5A Automotive Buck Regulator with Watchdog
Rev. 0 (321.0kB)
»材料組成を表示
»No Product Change Notifications exist
Product Overview
製品説明
The NCV8881 consists of a Buck switching regulator (SMPS) with a combination SMPS output undervoltage monitor and CPU watchdog circuit. In addition, two fixed-voltage low dropout regulator outputs are provided, and share an LDO output voltage status output. Once enabled, regulator operation continues until the Watchdog signal is no longer present. The NCV8881 is intended for Automotive, battery-connected applications that must withstand a 40 V load dump. The switching regulator is capable of converting the typical 9 V to 19 V automotive input voltage range to outputs from 3.3 V to 8 V at a constant switching frequency, which can be resistor programmed or synchronized to an external clock signal. Enable input threshold and hysteresis are programmable, with the enable input state replicated at an open drain Ignition Buffer output. The regulators are protected by current limiting, input overvoltage and overtemperature shutdown, as well as SMPS short circuit shutdown.
特長
 
  • 1.5 A Switching Regulator (internal power switch)
  • 100 mA, 5 V LDO Output
  • 40 mA, 8.5 V LDO Output
  • Operating Range 5 V to 19 V
  • Programmable SMPS Frequency
  • SMPS can be Synchronized to an External Clock
  • Programmable SMPS Output Voltage Down to 0.8 V
  • ±2% Reference Voltage Tolerance
  • Internal SMPS Soft-Start
  • Voltage-mode SMPS Control
  • SMPS Cycle-by-Cycle Current Limit and Short-Circuit Protection
  • Internal Bootstrap Diode
  • Logic level Enable Input
  • Enable Input Hysteresis Programmable by External Resistor Divider
  • Enable Input State is Replicated at an Open Drain Output
  • CPU Watchdog with Resistor Programmable Delays
  • Watchdog Reset Output also Indicates SMPS Output Out of Regulation
  • Battery Input Withstands Load Dump to 40 V
  • Low Standby Current
  • Thermal Shutdown (TSD)
  • NCV Prefix for Automotive and Other Applications Requiring Site and Change Controls
  • These are Pb-Free Devices
アプリケーション   最終製品
  • Audio
  • Infotainment
  • Safety - Vision Systems
  • Instrumentation
 
  • Automotive Systems
技術資料 & デザイン・リソース
データシート (1) パッケージ図 (1)
供給状況 & サンプル
製品
状態
Compliance
内容
外形
MSL*
梱包形態
予算 価格/Unit
タイプ
Case Outline
タイプ
数量
NCV8881PWR2G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
Switcher with watchdog and reset, Switcher with watchdog and reset SOIC-16W EP 751AG 1 Tape and Reel 1000 $2.8333
面実装デバイスためのモイスチャー・レベル(260°Cリフローでの鉛フリー測定、235°Cリフローでの鉛フリー以外測定)
マーケットリードタイム(週) : Contact Factory
Datasheet: 1.5A Automotive Buck Regulator with Watchdog
Rev. 0 (321.0kB)
»材料組成を表示
»No Product Change Notifications exist
Product Overview

Product Compliance Status Description Topology Control Mode VCC Min (V) VCC Max (V) VO Typ (V) IO Typ (A) Efficiency (%) fSW Typ (kHz) Package Type
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     Switcher with watchdog and reset, Switcher with watchdog and reset   Step-Down   Voltage Mode   5   40   5, 8.5   1.5     275   SOIC-16W EP 
Datasheet: 1.5A Automotive Buck Regulator with Watchdog
Rev. 0 (321.0kB)
»材料組成を表示
»No Product Change Notifications exist
Product Overview
Case Outline
751AG   
Datasheet: 1.5A Automotive Buck Regulator with Watchdog
Rev. 0 (321.0kB)
»材料組成を表示
»No Product Change Notifications exist
Product Overview
過去に閲覧した製品
一覧をクリアする