|
|
|
|
|
|
| 100 Watt Universal Input PFC Boost Using NCP1601A |
AND8182/D (207.0kB)
|
1 |
|
100 |
| 100 Watt Universal Input PFC Converter |
AND8106/D (60.0kB)
|
2 |
|
100 |
| 125 kbps with AMIS-4168x |
AND8365/D (2060.0kB)
|
0 |
|
100 |
| 19 V, 3 A, Universal Input AC-DC Adaptor Using NCP1271 |
AND8242/D (752.0kB)
|
3 |
|
100 |
| 2 Switch forward Current Mode converter with the NCP1252 |
AND8373/D (501.0kB)
|
0 |
|
100 |
| 3.3 V / 20 A Post-Regulator Driven by the NCP4331 |
AND8316/D (312.0kB)
|
0 |
|
100 |
| 300 W, Wide Mains, PFC Stage Driven by the NCP1654 |
AND8324/D (681.0kB)
|
2 |
|
100 |
| 300 W, Wide Mains, PFC Stage Driven by the NCP1653 |
AND8185/D (152.0kB)
|
1 |
|
100 |
| 300 Watt, 100kHz Converter Utilizes Economical Bipolar Planar Power Transistors |
AN1320/D (281.0kB)
|
1 |
|
100 |
| 350 mA Buck Boost LED Driver using Bipolar Junction Transistors |
AND8305/D (623.0kB)
|
1 |
|
100 |
| 48 W, 24 V/7.5 V Universal Input AC-DC Printer Adapter Using the NCP1219 |
AND8393/D (4197.0kB)
|
2 |
|
100 |
| 5.0 V, 2.0 A Flyback Converter |
AND8099/D (204.0kB)
|
2 |
|
100 |
| 700 mA LED Power Supply Using Monolithic Controller and Off-Line Current Boosted (Tapped Inductor) Buck Converter |
AND8328/D (132.0kB)
|
0 |
|
100 |
| 8 W DVD Power Supply with NCP1027 |
AND8262/D (232.0kB)
|
0 |
|
100 |
| 90 W, Single Stage, Notebook Adaptor |
AND8209/D (94.0kB)
|
0 |
|
100 |
| 90 W, Universal Input, Single Stage, PFC Converter |
AND8124/D (114.0kB)
|
4 |
|
100 |
| >85% Efficient 12 to 5 VDC Buck Converter |
AND8291/D (127.0kB)
|
1 |
|
100 |
| A 160 W CRT TV Power Supply Using NCP1337 |
AND8246/D (1052.0kB)
|
1 |
|
100 |
| A 30 W Power Supply Operating in A Quasi-Square Wave Resonant Mode |
AND8129/D (246.0kB)
|
0 |
|
100 |
| A 36 W Ballast Application with the NCP5181 |
AND8244/D (188.0kB)
|
1 |
|
100 |
| A 36W Ballast Application with NCP5104 |
AND8312/D (161.0kB)
|
0 |
|
100 |
| A 36W Ballast Application with NCP5106B |
AND8295/D (205.0kB)
|
0 |
|
100 |
| A 48 V/ 2 A High Efficiency, Single Stage, Isolated Power Factor Corrected Power Supply for LED Drivers and Telecom Power |
AND8394/D (200.0kB)
|
5 |
|
100 |
| A 5 V/2 A Standby Power Supply for INTEL Compliant ATX Applications |
AND8241/D (372.0kB)
|
0 |
|
100 |
| A 6 W/12 W Universal Mains Adapter with the NCP101X |
AND8142/D (161.0kB)
|
0 |
|
100 |
| A 70 W Low Standby Power Supply w/NCP120x Series |
AND8076/D (178.0kB)
|
2 |
|
100 |
| A 75 W TV Power Supply Operating in Quasi-square Wave Resonant Mode Using NCP1207 Controller |
AND8145/D (326.0kB)
|
0 |
|
100 |
| A 800 W Bridgeless PFC Stage |
AND8392/D (717.0kB)
|
0 |
|
100 |
| A 90 W/19V High Efficiency, Notebook Adapter Power Supply with Inherent Power Factor Correction |
AND8397/D (178.0kB)
|
1 |
|
100 |
| A Comparison of Key Parametrics of CMOS and Bipolar Integrated Circuits In Line Driver Applications |
AND8060/D (35.0kB)
|
0 |
|
100 |
| A Comparison of LVDS, CMOS, and ECL |
AND8059/D (34.0kB)
|
0 |
|
100 |
| A Comparison of the NBC12429 and MC12429 Programmable PLL Clock Synthesizers |
AND8120/D (34.0kB)
|
0 |
|
100 |
| A General Approach for Optimizing Dynamic Response for Buck Convertor |
AND8143/D (139.0kB)
|
0 |
|
100 |
| A Low Cost DDR Memory Power Supply Using the NCP1571 Synchronous Buck Converter and a LM358 Based Linear Voltage Regulator |
AND8079/D (150.0kB)
|
1 |
|
100 |
| A Quasi-Resonant SPICE Model Eases Feedback Loop Designs |
AND8112/D (205.0kB)
|
1 |
|
100 |
| A Simple DC SPICE Model for the LLC Converter |
AND8255/D (474.0kB)
|
2 |
|
100 |
| A Simple Low-Cost Non-Isolated Universal Input Off-Line Converter |
AND8078/D (139.0kB)
|
0 |
|
100 |
| A Simplified Power Supply Design Using the TL494 Control Circuit |
AN983/D (68.0kB)
|
1 |
|
100 |
| A519HRT HART Modem |
AND8346/D (536.0kB)
|
2 |
|
100 |
| AC Characteristics of ECL Devices |
AND8090/D (896.0kB)
|
1 |
|
100 |
| ADC Offset Calibration of the BelaSigna® 300 Series |
AND8341/D (126.0kB)
|
0 |
|
100 |
| ADT7463 Configurations |
AN612/D (222.0kB)
|
1 |
|
100 |
| AMIS-30622 and AMIS-30624 I2C Bus Level |
AND8449/D (344.0kB)
|
0 |
|
100 |
| AMIS-3062x Micro-Stepping Motor Driver Family, Robust Motion Control Using the AMIS-3062x |
AND8404/D (129.0kB)
|
2 |
|
100 |
| AMIS-30660 - Power Dissipation in Case of Bus Failure |
AND8377/D (104.0kB)
|
2 |
|
100 |
| AMIS-30660 Minimum Communication Speed |
AND8379/D (290.0kB)
|
2 |
|
100 |
| AMIS-30660 Model When VCC is Shorted to GND |
AND8378/D (88.0kB)
|
2 |
|
100 |
| AMIS-3066x - Difference Between 5 V and 3.3 V Versions |
AND8375/D (115.0kB)
|
2 |
|
100 |
| AMIS-4168x Behavior in Un-Powered Condition |
AND8367/D (94.0kB)
|
0 |
|
100 |
| AMIS-4168x Fault Tolerant CAN Transceiver |
AND8368/D (324.0kB)
|
0 |
|
100 |
