feedback
このページの評価をお願いします

サポート情報をお探しですか?


KAI-0340-10-40-A-EVK: H26 CCD Evaluation Kit

評価/開発ツール説明
The KAI-0340 Imager Evaluation Board, referred to in this document as the Imager Board, is designed to be used as part of a two-board set, used in conjunction with a Timing Generator Board. ON Semiconductor offers an Imager Board / Timing Generator Board package that has been designed and configured to operate with the KAI-0340 Image Sensor.
The Timing Generator Board generates the timing signals necessary to operate the CCD, and provides the power required by the Imager Board. The timing signals, in LVDS format, and the power, are provided to the Imager Board via the interface connector (J1). In addition, the Timing Generator Board performs the processing and digitization of the analog video output of the Imager Board.
The KAI−0340 Imager Board has been designed to operate the KAI−0340 with the specified performance at 40 MHz pixel clocking rate and nominal operating conditions. (See the KAI-0340 Performance Specifications for details).
For testing and characterization purposes, the KAI−0340 Imager board provides the ability to adjust many of the CCD bias voltages and CCD clock level voltages by adjusting potentiometers on the board. The Imager Board provides the means to modify other device operating parameters (e.g., CCD reset clock pulse width) by populating components differently on the board.
評価/開発ツール情報
製品 状態 Compliance 簡単な説明 使用パーツ アクション
KAI-0340-10-40-A-EVK Active
H26 CCD Evaluation Kit KAI-0340-AAA-CF-AA-DUAL
技術文書
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: Manual KAI-0340 Image Sensor Evaluation Timing Specification EVBUM2263/D - 152 KB  2 
Eval Board: Manual KAI-0340 Imager Board User's Manual EVBUM2264/D - 109 KB  2 
過去に閲覧した製品
一覧をクリアする