feedback
このページの評価をお願いします

サポート情報をお探しですか?


KAI-1003-12-20-A-EVK: H19 CCD Evaluation Kit

評価/開発ツール説明
The KAI-1003 Imager Evaluation Board is designed to be used as part of a two-board set, used in conjunction with a Timing Generator Board. ON Semiconductor offers an Imager Board / Timing Generator Board package that has been designed and configured to operate with the KAI−1003 Image Sensor.
The Timing Generator Board generates the timing signals necessary to operate the CCD, and provides the power required by the Imager Board. The timing signals, in LVDS format, and the power, are provided to the Imager Board via the interface connector (J3). In addition, the Timing Generator Board performs the processing and digitization of the analog video output of the Imager Board.
The KAI-1003 Imager Board has been designed to operate the KAI-1003 with the specified performance at 20 MHz pixel clocking rate and nominal operating conditions. (See the KAI-1003 performance specification for details).
For testing and calibration purposes, the KAI-1003 Imager board provides the ability to adjust the CCD substrate bias voltages and Reset Low CCD clock level voltage by adjusting potentiometers on the board.
評価/開発ツール情報
製品 状態 Compliance 簡単な説明 使用パーツ アクション
KAI-1003-12-20-A-EVK Active
H19 CCD Evaluation Kit KAI-1003-AAA-CR-AEKAI-1003-AAA-CR-B2
KAI-1003-ABA-CD-AEKAI-1003-ABA-CD-B2
KAI-1003-ABA-CD-DX-THALES
技術文書
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: Manual KAI-1003 Image Sensor Evaluation Timing Specification EVBUM2268/D - 244 KB  2 
Eval Board: Manual KAI-1003 Imager Board User's Manual EVBUM2269/D - 99 KB  2 
Eval Board: Manual AD9945 Timing Generator Board User's Manual EVBUM2265/D - 104 KB  2 
過去に閲覧した製品
一覧をクリアする