製品説明
The NCP101X series integrates a fixed-frequency current-mode controller and a 700 V voltage MOSFET. Housed in a PDIP7 package, the NCP101X offers everything needed to build a rugged and low-cost power supply, including soft-start, frequency jittering, short-circuit protection, skip-cycle, a maximum peak current setpoint and a Dynamic Self-Supply (no need for an auxiliary winding).
Unlike other monolithic solutions, the NCP101X is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65-100-130 kHz). When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically enters the so-called skip cycle mode and provides excellent efficiency at light loads. Because this occurs at typically 1/4 of the maximum peak value, no acoustic noise takes place. As a result, standby power is reduced to the minimum without acoustic noise generation.
|
特長 |
| |
|
-
Built-in 700V MOSFET with Typical RdsON of 11 or 22 Ohms
|
-
Large Creepage Distance between High-Voltage Pins
|
-
Current- Mode Fixed Frequency Operation: 65kHz - 100kHz - 130kHz
|
-
Skip-Cycle Operation at Low Peak Currents Only: No Acoustic Noise!
|
-
Dynamic Self-Supply, No Need of an Auxiliary Winding
|
|
|
-
Auto-Recovery Internal Output Short-Circuit Protection
|
-
Latched Overvoltage Protection with Auxiliary Winding Operation
|
-
Frequency Jittering for better EMI Signature
|
-
Below 100 mW Standby Power if Auxiliary Winding is Used
|
-
Internal Temperature Shutdown
|
-
Direct Optocoupler Connection
|
-
SPICE Models Available for Transient AC analysis
|
-
Pb-Free Packages are Available
|
|
アプリケーション |
|
最終製品 |
|
|
|
- Low Power AC/DC Adapter for Chargers
|