E7160SL-001GEVB: Ezairo ® 7160 SL Hybrid Demonstrator Board - Socketed version

The Ezairo 7160 SL Hybrid Demonstrator Board is designed to easily develop high-performance hearing aids based on the Ezairo 7160 SL hybrid. The board features many configuration options available via standard 0.1" header pins, and an on-board J-Link debugger based on the Atmel ATSAM3U2CA-AU microcontroller. Using a USB cable, the on-board debugger is used to interface the RSL10 radio within the Ezairo 7160 SL hybrid with a PC for debugging, data collection, or monitoring purposes.

This version of the board contains an elastomer socket and is recommended for general use, including development, testing and debug purposes since it enables the Ezairo 7160 SL module inserted in the socket to be easily swapped out.


  • On-board J-Link adaptor for debugging through a USB connection to the PC
  • Alternate on-board SWJ-DP (serial-wire and/or JTAG) interface for debugging the Arm ® Cortex-M3 processor
  • Access to all Ezairo 7160 SL peripherals via standard 0.1” headers
  • Onboard 4−bit level translator to translate the DIOs and debug interface at low voltage to a 3.3 V JTAG debugger
  • 4 Push Button Switches
  • On board 3.3 V Regulator
  • 3 LEDs
  • Test points and GND hooks for easy probing
  • Battery Holder
  • Current measuring header
  • Elastomer socket with hybrid
  • Antenna matching and filtering network
製品 状態 Compliance 簡単な説明 使用パーツ アクション
E7160SL-001GEVB Active
Ezairo ® 7160 SL Hybrid Demonstrator Board - Socketed version E7160-0-102A57-AG E7160-0-102A57-BPG
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: Manual Ezairo® 7160 SL Hybrid Demonstrator Board User's Manual EVBUM2581/D - 1125 KB  4 
Eval Board: Gerber E7160SL-001GEVB_GERBER.rev0 E7160SL-001GEVB_GERBER - 4984 KB  0 

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.