FUSB3307MPX-PPS-GEVB: Eval board for FUSB3307MPX & NCV81599, QFNW20 Package

The FUSB3307 evaluation board (GEVB), or kit (EVK), is a complete platform to evaluate the Type-C interface detection and USB Power Delivery 3.0 solution the FUSB3307 provides. The EVB is designed for both stand-alone operation and connection to test equipment for specific testing requirements. Using a single DC power supply, the EVB functions as a source only port. The various FUSB3307 evaluation boards contain a USB Type-C source controller supporting USB Power Delivery (PD) 3.0 with PPS (Programmable Power Supply) based on USB PD 3.0 standards, as well as a 4-switch buck boost controller, delivering VBUS levels from 3.3 V to 21 V, and supporting nominal current loads up to 3 A. The evaluation board has a VBAT connector for a DC power supply. It connects to the input switch of the NCV81599 DC to DC 4-switch Buck Boost Controller. The FUSB3307 is used for CV/CC control by providing feedback compensation to the NCV81599 controller. On the EVB, there are multiple test points for device validation. For example, VBUS and GND_SNS test points can be used for VBUS load testing.
特長およびアプリケーション

特長

  • Wide Input Voltage Range 4.5 V ~ 32 V
  • Wide Output Voltage Range 3.3 V ~ 21 V
  • Type−C r1.4 / USB PD 3.0 v1.2 Compliant
  • USB−IF TID # 1430
  • Type−C Source Only
  • Detects Cable Marker Identity
  • VCONN Supply
  • CV/CC Control with CATH Pin
  • On Board 5 mOhm Rsense Resistor
  • Over−Current/Short−Circuit Protection (OCP)
  • Auto−tuning OCP for Low Output Voltages
  • Over−Temperature Protection (OTP)
  • Over− and Under−Voltage Protection (OVP/UVP)
  • Cable Fault Detection
  • External NFET for VBUS Control
  • Easily Accessible Test Points for Rapid Evaluation and Performance Measurements
評価/開発ツール情報
製品 状態 Compliance 簡単な説明 使用パーツ アクション
FUSB3307MPX-PPS-GEVB Active
Pb-free
Eval board for FUSB3307MPX & NCV81599, QFNW20 Package FUSB3307D6MNWTWG NCV81599MWTXG
技術文書
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: Manual USB Type-C Controller Supporting USB Power Delivery 3.0 w/PPS and a 4-Switch Buck Boost Controller Evaluation Board User's Manual EVBUM2710/D - 5641 KB  0 
Eval Board: BOM FUSB3307MPX-PPS-GEVB Bill of Materials (ROHS Compliant) FUSB3307MPX-PPS-GEVB_BOM_ROHS - 267 KB  2 
Eval Board: Gerber FUSB3307MPX-PPS-GEVB Gerber Layout Files (Zip Format) FUSB3307MPX-PPS-GEVB_GERBER - 566 KB  1 
Eval Board: Schematic FUSB3307MPX-PPS-GEVB Schematic FUSB3307MPX-PPS-GEVB_SCHEMATIC - 102 KB  1 
Eval Board: Test Procedure FUSB3307MPX-PPS-GEVB Test Procedure FUSB3307MPX-PPS-GEVB_TEST_PROCEDURE - 672 KB  0 
過去に閲覧した製品
一覧をクリアする

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.