NB3N3020DTGEVB:  Clock Multiplier Evaluation Board

The NB3N3020DTG is a high precision, low phase noise selectable clock multiplier. The device takes a 5 - 27 MHz fundamental mode parallel resonant crystal or a 2 - 210 MHz LVCMOS single ended clock source and generates a differential LVPECL output and a single ended LVCMOS/LVTTL output at a selectable clock output frequency which is a multiple of the input clock frequency. Three tri-level (Low, Mid, High) LVCMOS/LVTTL single ended select pins set one of 26 possible clock multipliers. An LVCMOS/LVTTL output enable (OE) tri-states clock outputs when low. This device is housed in 5 mm x 4.4 mm narrow body TSSOP-16 pin package.
The NB3N3020DTGEVB Evaluation board is designed to provide a flexible and convenient platform to quickly program, evaluate and verify the performance and operation of the NB3N3020DTG TSSOP-16 device under test: With the device removed, this NB3N5573DTGEVB Evaluation board is designed to accept a 16 Lead TSSOP Socket to permit use as an insertion test fixture.


  • Crystal mount source, or input external clock source (SMA). One 25 MHz crystal is supplied.
  • A TSSOP-16 NB3N3020DTG device is solder mounted or the board may be adapted for insertion testing by adding a TSSOP-16 socket.
  • Separate supply connectors for VDD, GND, and VEE (banana jacks and Anvil Clips)
製品 状態 Compliance 簡単な説明 使用パーツ アクション
NB3N3020DTGEVB Active
Clock Multiplier Evaluation Board NB3N3020DTG NB3N3020DTR2G
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: Manual NB3N3020DTGEVB Evaluation Board User's Manual EVBUM2063/D - 346 KB  2 

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.