NCP3065SOBSTGEVB:  Boost Demonstration Evaluation Board

The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs (HBLED). The device has a very low feedback voltage of 235 mV (nominal) which is used to regulate the average current of the LED string. In addition, the NCP3065 has a wide input voltage up to 40 V to allow it to operate from 12 Vac or 12 Vdc supplies commonly used for lighting applications as well as unregulated supplies such as Lead Acid batteries.
The device can be configured in a controller topology with the addition of an external transistor to support higher LED currents beyond the 1.5 A rated switch current of the internal transistor. The NCP3065 switching regulator can be configured in Step-Down (Buck) and Step-Up (boost) topologies with a minimum number of external components.
評価/開発ツール情報
製品 状態 Compliance 簡単な説明 使用パーツ アクション
NCP3065SOBSTGEVB Active
Pb-free
Boost Demonstration Evaluation Board NCP3065DR2G
技術文書
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: BOM NCP3065SOBSTGEVB_BOM_ROHS.rev0 NCP3065SOBSTGEVB_BOM_ROHS - 177 KB  0 
Eval Board: Gerber NCP3065SOBSTGEVB_GERBER.rev0 NCP3065SOBSTGEVB_GERBER - 31 KB  0 
Eval Board: Schematic NCP3065SOBSTGEVB_SCHEMATIC.rev0 NCP3065SOBSTGEVB_SCHEMATIC - 121 KB  0 
過去に閲覧した製品
一覧をクリアする

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.