Release notes for PlcEepromGenerator.exe, version 1.
ON Semiconductor Energy Management Products, 2014-11-28.
________________________________________________________

The NCN49597 and NCN49599 modems can  retrieve firmware from  an attached
EEPROM.  However,  the firmware image  must be stored with specific meta-
information. The included executable PlcEepromGenerator.exe  can add this
meta-information to a regular binary firmware image.  The output can then
be programmed into the EEPROM.

For more information on the meta-information,  refer to the datasheet  of
the  NCN49597  or  NCN49599.   For  usage  instruction,  enter
PlcEepromGenerator.exe -h  on  the command line.  For  other  information,
contact your sales representative.

Please note  these tools  are not  production  tools.  The standard  terms
and conditions of ON Semiconductor apply, in particular

    DEVELOPMENT PRODUCT(S), PROTOTYPE OR OTHER NON-PRODUCTION PRODUCT(S),
    SAMPLES OF PRODUCTION PRODUCT(S)  AND SOFTWARE ARE  NOT WARRANTED AND
    ARE PROVIDED ON AN AS IS BASIS ONLY.

The tools are provided for us with ON Semiconductor modems only.