Power Supply Function Documentation

Sys_Power_RFEnable

void Sys_Power_RFEnable()

RF Power Switch and Isolation.

Location: power.h:45

Example Code for Sys_Power_RFEnable

// Enable RF power switches, remove RF Isolation

Sys_Power_RFEnable();

Sys_Power_CC312_Enable

void Sys_Power_CC312_Enable()

CryptoCell312 Power Enable.

Location: power.h:67

Example Code for Sys_Power_CC312_Enable

// Enable the CryptoCell block and remove its power isolation.

Sys_Power_CC312_Enable();

Sys_Power_CC312_Disable

void Sys_Power_CC312_Disable()

CryptoCell312 Power Disable.

Location: power.h:92

Example Code for Sys_Power_CC312_Disable

// Disable and isolate power for the CryptoCell block.

Sys_Power_CC312_Disable();

Sys_Power_CC312AO_Enable

void Sys_Power_CC312AO_Enable()

CryptoCell312AO Power Switch and Isolation.

Location: power.h:112

Example Code for Sys_Power_CC312AO_Enable

// Enable the CryptoCell block and remove its power isolation, and power

// on the Always On (AO) component for the CryptoCell block.

Sys_Power_CC312AO_Enable();

Sys_Power_CC312AO_Disable

void Sys_Power_CC312AO_Disable()

CryptoCell312AO Power Switch and Isolation.

Location: power.h:140

Example Code for Sys_Power_CC312AO_Disable

// Disable and isolate power for the CryptoCell block, and power off the

// Always On (AO) component for the CryptoCell block.

Sys_Power_CC312AO_Disable();

Sys_Power_FPU_Enable

void Sys_Power_FPU_Enable()

Enable the FPU.

Location: power.h:166

Example Code for Sys_Power_FPU_Enable

// Enables the FPU and removes its isolation.

Sys_Power_FPU_Enable();

Sys_Power_FPU_Disable

uint32_t Sys_Power_FPU_Disable()

Disable the FPU.

Location: power.h:201

Return

FPU_Q_ACCEPTED if the FPU power down was successful. FPU_Q_DENIED if the FPU power down failed or if the FPU is already off.

Example Code for Sys_Power_FPU_Disable

// Disables and isolates the FPU.

result = Sys_Power_FPU_Disable();