RF_AGC_LUT5
|
Bit Field |
Read/Write |
Field Name |
Description |
|---|---|---|---|
|
26:25 |
RW |
IEEE802154_OPTS_CNT_LIM_802154 |
Set the number of samples to wait before increasing the threshold |
|
24:22 |
RW |
IEEE802154_OPTS_CNT_OK_INC_802154 |
Set the increment to the counter that indicates that the correlators peaks are coherent |
|
21 |
RW |
IEEE802154_OPTS_USE_OS_802154 |
Enable the new algorithm working in the oversampled domain for the demodulation of the IEEE 802.15.4 protocol |
|
20 |
RW |
IEEE802154_OPTS_EN_DW_TEST |
Tx data-whitening before the convolutional code block |
|
18:16 |
RW |
IEEE802154_OPTS_C2B_THR |
Threshold of the chip2bit correlator of the IEEE 802.15.4 protocol |
|
13:12 |
RW |
DATA_STREAMS_BER_CLK_MODE |
Set the clock output mode for BER mode or RW mode |
|
10 |
RW |
DATA_STREAMS_RX_DATA_NOT_SAMPLED |
Signal rx_data in test modes sampling |
|
9 |
RW |
DATA_STREAMS_PHASE_GREY |
Phase signal encoding |
|
8 |
RW |
DATA_STREAMS_TX_IN_CLK_TOGGLE |
Input clock |
|
3:0 |
RW |
AGC_LUT_5_AGC_LEVEL_11_HI |
AGC values level 11 (MSB) |
|
Bit Field |
Field Name |
Value Symbol |
Value Description |
Hex Value |
|---|---|---|---|---|
|
26:25 |
IEEE802154_OPTS_CNT_LIM_802154 |
IEEE802154_OPTS_CNT_LIM_802154_DEFAULT |
|
0x2* |
|
24:22 |
IEEE802154_OPTS_CNT_OK_INC_802154 |
IEEE802154_OPTS_CNT_OK_INC_802154_DEFAULT |
|
0x4* |
|
21 |
IEEE802154_OPTS_USE_OS_802154 |
IEEE802154_OPTS_USE_OS_802154_DISABLE |
Disable the Tx data-whitening |
0x0 |
|
|
|
IEEE802154_OPTS_USE_OS_802154_ENABLE |
Enable the Tx data-whitening |
0x1* |
|
20 |
IEEE802154_OPTS_EN_DW_TEST |
IEEE802154_OPTS_EN_DW_TEST_DISABLE |
Disable the Tx data-whitening |
0x0* |
|
|
|
IEEE802154_OPTS_EN_DW_TEST_ENABLE |
Enable the Tx data-whitening |
0x1 |
|
18:16 |
IEEE802154_OPTS_C2B_THR |
IEEE802154_OPTS_C2B_THR_DEFAULT |
|
0x4* |
|
13:12 |
DATA_STREAMS_BER_CLK_MODE |
DATA_STREAMS_BER_CLK_MODE_FALLING |
data change on falling edge |
0x0* |
|
|
|
DATA_STREAMS_BER_CLK_MODE_RISING |
Data change on rising edge |
0x1 |
|
|
|
DATA_STREAMS_BER_CLK_MODE_TOGGLE |
Clock signal is a toggled signal |
0x2 |
|
|
|
DATA_STREAMS_BER_CLK_MODE_RECOVERY |
Enable signal from clock recovery |
0x3 |
|
10 |
DATA_STREAMS_RX_DATA_NOT_SAMPLED |
DATA_STREAMS_RX_DATA_NOT_SAMPLED_DISABLE |
The signal rx_data in test modes is sampled |
0x0* |
|
|
|
DATA_STREAMS_RX_DATA_NOT_SAMPLED_ENABLE |
The signal rx_data in test modes is not sampled |
0x1 |
|
9 |
DATA_STREAMS_PHASE_GREY |
DATA_STREAMS_PHASE_GREY_DISABLE |
The phase signal on the test bus is not grey encoded |
0x0* |
|
|
|
DATA_STREAMS_PHASE_GREY_ENABLE |
The phase signal on the test bus is grey encoded |
0x1 |
|
8 |
DATA_STREAMS_TX_IN_CLK_TOGGLE |
DATA_STREAMS_TX_IN_CLK_TOGGLE_DISABLE |
Input clock is not a toggling signal |
0x0* |
|
|
|
DATA_STREAMS_TX_IN_CLK_TOGGLE_ENABLE |
input clock is a toggling signal |
0x1 |
|
3:0 |
AGC_LUT_5_AGC_LEVEL_11_HI |
AGC_LUT_5_AGC_LEVEL_11_HI_DEFAULT |
|
0xE* |