SPI_CTRL

Bit Field	Read/Write	Field Name	Description
19	R	CS_STATUS	SPI CS status
18:17	R	MODE_STATUS	SPI mode status
16	R	ENABLE_STATUS	SPI enable status
9	W	CS_0	Lower the SPI chip-select line (master mode)
8	W	CS_1	Raise the SPI chip-select line (master mode)
7	W	MODE_NOP	Set mode to no operation
6	W	MODE_WRITE	Set mode to read operation
5	W	MODE_READ	Set mode to write operation
4	W	MODE_READ_WRITE	Set mode to read and write operation
3	W	START	Start a data transfer in master read mode
2	W	RESET	Reset the SPI interface
1	W	DISABLE	Disable the SPI interface
0	W	ENABLE	Enable the SPI interface

Bit Field	Field Name	Value Symbol	Value Description	Hex Value
19	CS_STATUS	SPI_STATUS_CS_0	SPI CS is low	0x0
		SPI_STATUS_CS_1	SPI CS is high	0x1*
18:17	MODE_STATUS	SPI_STATUS_MODE_NOP	Mode is no operation (not allowed in DSPI and QSPI modes)	0x0*
		SPI_STATUS_MODE_WRITE	Mode is write data	0x1
		SPI_STATUS_MODE_READ	Mode is read data	0x2
		SPI_STATUS_MODE_READ_WRITE	Mode is read and write data (not allowed in DSPI and QSPI modes)	0x3
16	ENABLE_STATUS	SPI_STATUS_DISABLED	SPI interface is disabled	0x0*
		SPI_STATUS_ENABLED	SPI interface is enabled	0x1
9	CS_0	SPI_CS_0	Set the SPI CS signal low	0x1
8	CS_1	SPI_CS_1	Set the SPI CS signal high	0x1
7	MODE_NOP	SPI_MODE_NOP	Set the mode to no operation	0x1
6	MODE_WRITE	SPI_MODE_WRITE	Set the mode to write operation	0x1
5	MODE_READ	SPI_MODE_READ	Set the mode to read operation	0x1
4	MODE_READ_WRITE	SPI_MODE_READ_WRITE	Set the mode to read and write operation (not allowed in DSPI and QSPI modes)	0x1
3	START	SPI_START_READ	Start a transfer on the SPI interface (master read mode only)	0x1
2	RESET	SPI_RESET	Reset the SPI interface	0x1
1	DISABLE	SPI_DISABLE	Disable the SPI interface	0x1
0	ENABLE	SPI_ENABLE	Enable the SPI interface	0x1