.SUBCKT nvljd4007nz 1 2 3
XQ1 1 4 3 nvljd4007fet
XZ1 2 6 generic12_4v
XZ2 3 6 generic12_4v
R2 2 4 2.22k
.ENDS nvljd4007nz 
*
.SUBCKT nvljd4007fet 1 2 3
**************************************
*      Model Generated by MODPEX     *
*Copyright(c) Symmetry Design Systems*
*         All Rights Reserved        *
*    UNPUBLISHED LICENSED SOFTWARE   *
*   Contains Proprietary Information *
*      Which is The Property of      *
*     SYMMETRY OR ITS LICENSORS      *
*Commercial Use or Resale Restricted *
*   by Symmetry License Agreement    *
**************************************
* Model generated on May 31, 13
* MODEL FORMAT: SPICE3
* Symmetry POWER MOS Model (Version 1.0)
* External Node Designations
* Node 1 -> Drain
* Node 2 -> Gate
* Node 3 -> Source
M1 9 7 8 8 MM L=100u W=100u
* Default values used in MM:
* The voltage-dependent capacitances are
* not included. Other default values are:
*   RS=0 RD=0 LD=0 CBD=0 CBS=0 CGBO=0
.MODEL MM NMOS LEVEL=1 IS=1e-32
+VTO=1.25787 LAMBDA=0 KP=1.04922
+CGSO=8.64173e-08 CGDO=1.95799e-08
RS 8 3 0.90635
D1 3 1 MD
.MODEL MD D IS=2.84982e-10 RS=0.0915227 N=1.5 BV=37
+IBV=0.00025 EG=1.1377 XTI=2.44177 TT=0
+CJO=1.52115e-11 VJ=0.805861 M=0.386827 FC=0.5
RDS 3 1 3e+11
RD 9 1 0.0001
RG 2 7 10
D2 4 5 MD1
* Default values used in MD1:
*   RS=0 EG=1.11 XTI=3.0 TT=0
*   BV=infinite IBV=1mA
.MODEL MD1 D IS=1e-32 N=50
+CJO=8.24557e-12 VJ=0.616664 M=0.9 FC=1e-08
D3 0 5 MD2
* Default values used in MD2:
*   EG=1.11 XTI=3.0 TT=0 CJO=0
*   BV=infinite IBV=1mA
.MODEL MD2 D IS=1e-10 N=0.4 RS=3e-06
RL 5 10 1
FI2 7 9 VFI2 -1
VFI2 4 0 0
EV16 10 0 9 7 1
CAP 11 10 1.7807e-10
FI1 7 9 VFI1 -1
VFI1 11 6 0
RCAP 6 10 1
D4 0 6 MD3
* Default values used in MD3:
*   EG=1.11 XTI=3.0 TT=0 CJO=0
*   RS=0 BV=infinite IBV=1mA
.MODEL MD3 D IS=1e-10 N=0.4
.ENDS nvljd4007fet
*
.SUBCKT generic12_4v 2 1
* MODEL FORMAT: SPICE3
*     anode cathode
*node: 2      1
*    Forward Section
D1 2 1 MD1 TEMP=25
.MODEL MD1 D IS=6.57933e-10 N=1.84949 XTI=1 RS=2.2 CJO=1e-11 TT=2e-09
*    Leakage Current
R 1 2 1.2e+10 MDR	
.MODEL MDR R TC1=-0.0679198 TC2=0.00155388
*    Breakdown
RZ 2 3 8.96012
IZG 4 3 0.24
R4 4 3 500
D3 3 4 MD3 TEMP=25
.MODEL MD3 D IS=2.5e-12 N=0.12664 XTI=0 EG=0.1
D2 5 4 MD2 TEMP=25
.MODEL MD2 D IS=2.5e-12 N=0.397079 XTI=0 EG=0.1
EV1 1 5 6 0 1
IBV 0 6 0.001
RBV 6 0 12166.2 MDRBV
.MODEL MDRBV R TC1=0
*-- SPICE3 DIODE MODEL DEFAULT PARAMETER
*  VALUES ARE ASSUMED
*IS=1E-14 RS=0 N=1 TT=0 CJO=0
*VJ=1 M=0.5 EG=1.11 XTI=3 FC=0.5
*KF=0 AF=1 BV=inf IBV=1e-3 TNOM=27
.ENDS generic12_4v