feedback
このページの評価をお願いします
サポート情報をお探しですか?

Selected In-Vehicle Networking Solution
Selected Solution
戻る In-Vehicle Networking solution

System Basis Chips (SBC)

SBC (System Basis Chips) offer a cost effective, high performance, reliable approach to multiple LIN & CAN configurations. These products support linear voltage regulation, controlled through an SPI interface. They possess various power-saving modes—such as standby, sleep, stop, and other features such as wakeup, and watchdog timer.
Products
NCV7425: System Basis Chip with LIN and 150 mA LDO Regulator
The NCV7425 is a fully featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus.
NCV7425: System Basis Chip with LIN and 150 mA LDO Regulator
NCV7428: System Basis Chip with LIN and LDO Regulator
NCV7428 is a System Basis Chip (SBC) integrating functions typically found in automotive Electronic Control Units (ECUs). NCV7428 provides and monitors the low−voltage power supply for the application microcontroller and other loads and includes a LIN transceiver.
NCV7428: System Basis Chip with LIN and LDO Regulator
NCV7429: System Basis Chip with LIN, LS and HS Switches
The NCV7429 is a monolithic LIN System-Basis-Chip with enhanced feature set useful in Automotive Body Control systems. Besides the LIN bus interface the IC features a 5 V voltage regulator, high-side and low-side switches to control LEDs and relays, and supervision functionality like a window watchdog. 
NCV7429: System Basis Chip with LIN, LS and HS Switches
NCV7462: System Basis Chip with CAN, LIN, HS & LS Drivers
The NCV7462 is a monolotic LIN/CAN System-Basis-Chip with enhanced feature set usefull in Automotive Body Control systems. Besides the bus interfaces the IC features two 5V voltage regulators, high-side and low-side switches to control LED's and relays, and supervision functionality like a window watchdog.
NCV7462: System Basis Chip with CAN, LIN, HS & LS Drivers
NCV7471: System Basis Chip with Dual LIN, HS CAN and 500 mA Boost-Buck DC-DC
NCV7471(A) is a System Basis Chip (SBC) integrating functions typically found in automotive Electronic Control Units (ECUs) in the body domain. 
NCV7471: System Basis Chip with Dual LIN, HS CAN and 500 mA Boost-Buck DC-DC
Technical Documents
Basics of In-Vehicle Networking (IVN) - ON Semiconductor Products
This presentation deals with basics of LIN, CAN (FD), FlexRay and automotive Ethernet technologies.
Basics of In-Vehicle Networking (IVN) - ON Semiconductor Products
NCV7425 - Mode Transition Timing
In order to correctly control the mode transitions of NCV7425 signals EN, STB and TxD shall respect mutual timing dependencies as explained in this document.
NCV7425 - Mode Transition Timing
Evaluation Boards
NCV74250V1GEVB:  3.3 V / 150 mA LDO Evaluation Board
The NCV74250V1GEVB is a Reference Design for LIN transceiver with integrated low drop voltage regulator. The reference design can be interfaced via IO pins to an external microcontroller or simple switch board. 
NCV74250V1GEVB:  3.3 V / 150 mA LDO Evaluation Board
NCV74255V1GEVB:  5 V / 150 mA LDO Evaluation Board
The NCV74255V1GEVB is a Reference Design for LIN transceiver with integrated low drop voltage regulator. The reference design can be interfaced via IO pins to an external microcontroller or simple switch board. 
NCV74255V1GEVB:  5 V / 150 mA LDO Evaluation Board
Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.