F143-MINI-B-MOD-GEVB: AX8052F143 Mini DVK Mod Evaluation Board

The F143-Mini-B-MOD module is equipped with two 1.5 V LR44 batteries and a chip antenna. It can be powered either by the batteries or the debug adapter. The PCB section containing the battery clips can be broken away if not used, resulting in a module equal in size to the F143-Mini-A-MOD. Modules are designed for use at a carrier frequency of 868.3 MHz. This board is optimized for operation at 868MHz, however it can be re-programmed for operation in the 915MHz band by using our RadioLab software. RF performance will be reduced but the board is still useful for evaluation and software development. An optimized 915Mhz version is planned.

The F143-MINI-2-GEVK (AX8052F143 Mini Development Kit) can be found here: F143-MINI-2-GEVK

Note: If purchasing this board without the F143-MINI-2-GEVK kit, the AXDBG Debug Adapter much also be purchased for programming.

See below for links to the F143 Mini Kit Quick-start guide and for PCB design files. For additional documentation and software resources for developing radio applications see:
  • The AX8052F100 product page for microcontroller specific resources such as the AX8052 datasheet and programming manual
  • The product page for AX5043 for radio specific resources such as datasheets and radio programming manuals.
  • The AX8052F143 page, which has many resources combined with the AX8052F143 datasheet
製品 状態 Compliance 簡単な説明 使用パーツ アクション
AX8052F143 Mini DVK Mod Evaluation Board AX8052F143-3-TX30 AX8052F143-3-TX40
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: Gerber F143-MINI-B-MOD-GEVB Gerber (Zip Format) - 126 KB  1 
Eval Board: Schematic F143-MINI-B-MOD-GEVB Schematic F143-MINI-B-MOD-GEVB_SCHEMATIC.pdf - 55 KB  1 
Application Notes F143-MINI-X-GEVK Quick Start Guide AND9699/D - 528 KB  0 

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.