feedback
このページの評価をお願いします
サポート情報をお探しですか？

FUSB251GEVB: Type-C™ CC and SBU Protection IC Evaluation Board

The FUSB251 evaluation board is designed to be inserted between a board that contains a Type-C controller (such as FUSB302B or FUSB307B) and a source of voltage for OVP testing. Test points and header switches are ready to test OVP and moisture detection functions on CC and SBU. LED indicators will show power status and Interrupt. If there isn't access to a Type-C voltage source, test points (GND and VDD) are available on the board for direct power supply connections. The Type-C receptacle can accept a Type-C device such as Type-C charger or memory stick to demonstrate normal USB functionality.
特長およびアプリケーション

特長

  • This product is general usage and suitable for many different applications.
  • Dead battery mode provides default Rd presenting on CC1/2
  • 24volt DC tolerant on CC and SBU
  • +/- 35volt Surge protection on CC and SBU
  • Over voltage protection on CC and SBU
  • I2C interface with Interrupt for event notification.
  • Moisture detection on CC and SBU pins.
  • On-chip IEC ESD protection with external capacitor on CAP pin
  • CC Ron 0.3ohm Typical
  • SBU Ron 3ohm Typical
  • 50Mhz Bandwidth on SBU switch
  • 15 ball WLCSP

アプリケーション

  • This product is general usage and suitable for many different applications.
評価/開発ツール情報
製品 状態 Compliance 簡単な説明 使用パーツ アクション
FUSB251GEVB Active
Pb-free
Type-C™ CC and SBU Protection IC Evaluation Board FUSB251UCX
技術文書
タイプ ドキュメント・タイトル ドキュメント ID/サイズ 修正
Eval Board: Manual Type-C CC and SBU Protection IC Evaluation Board User's Manual EVBUM2637/D - 912 KB  0 
Eval Board: BOM FUSB251GEVB Bill of Materials (ROHS Compliant) FUSB251GEVB_BOM_ROHS - 135 KB  0 
Eval Board: Gerber FUSB251GEVB Gerber Layout Files (Zip Format) FUSB251GEVB_GERBER - 423 KB  0 
Eval Board: Schematic FUSB251GEVB Schematic FUSB251GEVB_SCHEMATIC - 204 KB  0 
Eval Board: Test Procedure FUSB251GEVB Test Procedure FUSB251GEVB_TEST_PROCEDURE - 224 KB  0 
Software FUSB251GEVB GUI Layout Files (Zip Format) FUSB251_GUI - 7996 KB  1 
Software FUSB251GEVB Firmware Layout Files (Zip Format) FUSB251_FIRMWARE - 23 KB  0 
Software FUSB251GEVB Reference Code (Zip Format) FUSB251GEVB_REFERENCE_CODE - 7 KB  1 
過去に閲覧した製品
一覧をクリアする

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.