MICRORB-SMA-10020-GEVB: MicroRB-10020-MLP mounted onto a PCB with three SMA connectors (No active electronics)
The MICRORB−SMA is a printed circuit board (PCB) that can facilitate the evaluation of the MICRORB MLP sensors. The board has three female SMA connectors for connecting the bias voltage, the standard output from the cathode and the fast output signal. The output signals can be connected directly to a 50 Ohm-terminated oscilloscope for viewing. The biasing and output signal tracks are laid out in such a way as to preserve the fast timing characteristics of the sensor. The MICRORB−SMA is recommended for users who require a plug-and-play set-up to quickly evaluate MICRORB sensors with optimum timing performance. The board also allows the signal from the cathode-anode readout to be observed at the same time as the fast output. The outputs can be connected directly to the oscilloscope or measurement device, but external preamplification may be required to boost the signal. The table below lists the SMA board connections. The SMA board electrical schematics are available to download in the Board Reference Design document. |
評価/開発ツール情報
| 製品 | 状態 | Compliance | 簡単な説明 | 使用パーツ | アクション |
|---|---|---|---|---|---|
| MICRORB-SMA-10020-GEVB | Active |
|
MicroRB-10020-MLP mounted onto a PCB with three SMA connectors (No active electronics) | MICRORB-10020-MLP-TR , MICRORB-10020-MLP-TR1 |
| デザイン・サポート |
Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.