MicroRB-10035-MLP mounted onto a PCB with three SMA connectors (No active electronics)

指定場所にジャンプ

Overview

The MICRORB−SMA is a printed circuit board (PCB) that can facilitate the evaluation of the MICRORB MLP sensors. The board has three female SMA connectors for connecting the bias voltage, the standard output from the cathode and the fast output signal. The output signals can be connected directly to a 50 Ohm-terminated oscilloscope for viewing. The biasing and output signal tracks are laid out in such a way as to preserve the fast timing characteristics of the sensor. The MICRORB−SMA is recommended for users who require a plug-and-play set-up to quickly evaluate MICRORB sensors with optimum timing performance. The board also allows the signal from the cathode-anode readout to be observed at the same time as the fast output. The outputs can be connected directly to the oscilloscope or measurement device, but external preamplification may be required to boost the signal. The table below lists the SMA board connections. The SMA board electrical schematics are available to download in the Board Reference Design document.

Evaluation/Development Tools

製品

タイプ

Ref. Design

状態

Part Used

アクション

MicroRB-10035-MLP mounted onto a PCB with three SMA connectors (No active electronics)

評価ボード

No

Active

Price N/A

More Details

Show More

1-25 of 25

Products per page

Jump to :