製品説明
The NBSG16 is a differential receiver/driver targeted for high frequency applications. The device is functionally equivalent to the EP16 and LVEP16 devices with much higher bandwidth and lower EMI capabilities.
Inputs incorporate internal 50-ohm termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), HSTL, LVTTL, LVCMOS, CML, or LVDS. Outputs are RSECL (Reduced Swing ECL), 400 mV.
The V
BB and V
MM pins are internally generated voltage supplies available to this device only. The V
BB is used as a reference voltage for single-ended NECL or PECL inputs and the V
MM pin is used as a reference voltage for LVCMOS inputs. For all single-ended input conditions, the unused complementary differential input is connected to V
BB or V
MM as a switching reference voltage. V
BB or V
MM may also rebias AC coupled inputs. When used, decouple V
BB and V
MM via a 0.01 uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, V
BB and V
MM outputs should be left open.
|
特長 |
| |
|
-
Maximum Input Clock Frequency > 12 GHz Typical
|
-
Maximum Input Data Rate > 12 Gb/s Typical
|
-
120 ps Typical Propagation Delay
|
-
40 ps Typical Rise and Fall Times
|
-
RSPECL Output with Operating Range: VCC = 2.375 V to 3.465 V with VEE = 0 V
|
-
RSNECL Output with RSNECL or NECL Inputs with Operating Range: VCC = 0 V with VEE = -2.375 V to -3.465 V
|
-
RSECL Output Level (400 mV Peak-to-Peak Output), Differential Output Only
|
-
50 Ω Internal Input Termination Resistors
|
-
VBB and VMM Reference Voltage Output
|
-
Compatible with Existing 2.5 V/3.3 V LVEP, EP, and LVEL Devices
|
-
Pb-Free Packages are Available
|
|
アプリケーション |
|
最終製品 |
- SONET OC-192 / SDH STM-64 Optical Interface
- 10 Gigabit Ethernet
- Optical Networking Equipment
- Advance Test Equipment
- Ultra High Speed Terabit Routers
|
|
- ATE Instrumentation, Networking
|