feedback
このページの評価をお願いします
サポート情報をお探しですか?

RDM 1X16 SIPM ARRAY: NIR-enhanced for LiDAR Applications, Automotive Qualified

Datasheet: Silicon Photomultipliers (SiPM), RDM-Series 1 x 16 Monolithic Array
Rev. P2 (1366kB)
製品概要
»材料組成を表示
» 製品変更通知
The Silicon Photomultiplier (SiPM) is a high gain, single photon-sensitive sensor used for detection of visible to NIR wavelengths. The ArrayRDM−0116A10−DFN is a monolithic 1 × 16 array of SiPM pixels based on our market−leading RDM SiPM CMOS process. The RDM process has been specifically developed to create products that achieve high PDE (photon detection efficiency) at the NIR wavelengths of 905/940nm which are typically used for LiDAR and 3D dToF ranging applications.

The array is packaged in a robust DFN package that gives access to the 16 individual pixels via either the standard (cathode) or fast outputs. In order to meet the requirements for automotive LiDAR applications, this product will be qualified to the AEC-Q102 standard and has been developed in accordance with IATF 16949. An evaluation board (ArrayRDM−0116A10−GEVB) is also available for this product.

It is recommended that those new to SiPM sensors consult the Introduction to Silicon Photomultipliers application note.

Note: Automotive qualification and PPAP in process. Contact sales for additional information.

特長   利点
     
  • High gain and detection efficiency
 
  • Responsivity >100 kA/W @ 905 nm
  • Automotive qualified
 
  • AEC-Q102 and developed in accordance with IATF 16949
  • 1 x 16 pixel array format
 
  • Ideal for LiDAR applications using either mechanical or MEMs
  • PDE of 16% at 905 nm
 
  • Market leading sensitivity to enable detection of LiDAR return signals from low reflectivity objects at long range
  • Unique fast output
 
  • Ultra-fast rise times and pulse widths
  • <50 V bias supply
 
  • Simplifies biasing circuitry
  • 0.17 mm × 0.49 mm pixel size
   
  • DFN package (12 mm x 3 mm)
   
アプリケーション   最終製品
  • 3D Ranging & Sensing
  • Automotive LiDAR
  • Industrial LiDAR
  • Consumer 3D imaging
  • Robotics
 
  • Scanning LiDAR systems
製品
状態
Compliance
内容
外形
MSL
梱包形態
予算 価格/Unit
タイプ
Case Outline
タイプ
Temperature
タイプ
数量
ARRAYRDM-0116A10-DFN-TR Product Preview
AEC Qualified
PPAP Capable
Pb-free
Halide free
RDM 1X16 SIPM ARRAY, 1x16 SiPM Array, Full reel (3k pieces) DFN36 12x3, 0.65P 506EV 3 260 Contact Sales Office
ARRAYRDM-0116A10-DFN-TR-E Active
Pb-free
Halide free
RDM 1X16 SIPM ARRAY, 1x16 SiPM Array, Pre-production (Not Automotive Qualified) ARRAYC-300XX-144P-PCB 100DE NA Tape and Reel 1 Contact Sales Office
ARRAYRDM-0116A10-DFN-TR1 Product Preview
AEC Qualified
PPAP Capable
Pb-free
Halide free
RDM 1X16 SIPM ARRAY, 1x16 SiPM Array, Partial reel (1-2999 pieces) DFN36 12x3, 0.65P 506EV 4 260 Contact Sales Office
マーケットリードタイム(週) : Contact Factory
マーケットリードタイム(週) : Contact Factory
マーケットリードタイム(週) : Contact Factory
Case Outline
100DE    506EV   
過去に閲覧した製品
一覧をクリアする

特集ビデオ
Solid State LiDAR Design Considerations
Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.